1/20th scale Hull-2 Lower Cost MDF Kit



This Kit consists of 5 sheets of 3.0mm (1/8") Medium Density Fibreboard (MDF), each sheet is approximately 304mm (12") x 407mm (16") and contains ribs, deck runners, chine and bow pieces, motor mounts, laminated keel, propkeels and rudderkeel parts, deck toe rails, battery box, servo mounts, a square/spacing ruler and stand parts.

I recently amended this kit to change the long chine and deck timber checkouts to be both 3/16" (5mm) square as a  number of people in the US complained that they could no longer buy any timbers in 5/32" (4mm) square.


The 3mm MDF sheets I buy as outer protection for the expensive Birch plywood that I buy in 1210mm x 1210mm (4' x 4') sheets and I cut it into 4 x 3 smaller sheets so that it will fit into my Epilog 12" x 18" 50Watt laser cutter and also can be shipped fairly economically.

This kit weighs around 0.9 Kilograms or 2.0 Lbs.


The package

I send all packages with tracking so that they don't get lost. Often packaes are held at the local Post Office as they can be too large for the customers mailbox, so if it has been a week or more since I notified you about shipment, please check with your Post Office. If I receive an attempted delivery message I will email you.

All packages are marked with the international Harmonised code for Reduced Scale Model Kits - HS950320. I also wrap the laser cut MDF in cling wrap to keep the sheets together and to reduce the "burned wood" smell which has, in the past, caused a returned shipment from France.


The total price includes parcel postage to most places in Australia, New Zealand, Canada, the US, UK or Europe.



© copyright 2019 John Drain