1/20th scale Elco 77' Hull Kit

This Kit consists of 9 sheets of 2.0mm (5/64") Finish Birch Plywood, each sheet is approximately 304mm (12") x 407mm (16") and contains ribs, deck runners, chine and bow pieces, motor mounts, laminated keel and propkeel and rudderkeel parts, deck toe rails, battery box, servo mounts, a square/spacing ruler and stand parts.

 

The fine grade marine grade Birch Plywwod from Finland is either 3 or 4 ply (depends what I can get) I buy it in 1210mm x 1210mm (4' x 4') sheets and cut it into 4 x 3 smaller sheets so that it will fit into my Epilog 12" x 18" 50Watt laser cutter and also can be shipped fairly economically.

This kit weighs around 1.2 Kilograms or 2.5 Lbs.

 

The package

I send all packages with tracking so that they don't get lost. Often packages are held at the local Post Office as they can be too large for the customers mailbox, so if it has been a week or more since I notified you about shipment, check with your Post Office. If I receive an attempted delivery message I will email you.

All packages are marked with the Harmonised code for Reduced Scale Model Kits - HS950320. I also wrap the laser cut plywood in cling wrap to keep the sheets together and to reduce the "burned wood" smell which has, in the past, caused a returned shipment from France.

 

The total price includes parcel postage to most places in Australia, New Zealand, Canada, the US, UK or Europe.

 

 

BUY IT NOW!

© Copyright 2021 John Drain