Laser Cutting Drawings - More Information - Hull-2 Superstructure (Multi Scale) - PT-Boat.com

Multi Scale Hull-2 Superstructure Laser Cutting Drawings

This laser cutting Drawing set consists of multiple scale versions of .dwg and .dxf files in a single .zip file.

20th Scale

The 20th scale Hull-2 Superstructure should be cut from 4 sheets of 1.0mm Baltic Birch Plywood and 1 sheet of 0.6mm, or similar material, with the grain running in the long direction. Each sheet needs to be 300mm (12") x 400mm (16") or larger and contains the superstructure parts and many deck mounted parts.

35th Scale

The 35th scale Hull-2 Superstructure should be cut from 3 sheets of 0.6mm Baltic Birch Plywood and 1 sheet of 0.4mm, or similar material, with the grain running in the long direction. Each sheet needs to be 300mm (12") x 400mm (16") or larger and contains the superstructure parts and many deck mounted parts.

Note:

The fine marine grade Birch Plywood, that I use, is from Finland or Russia and is either 3 or 4 ply (depends what I can get) I buy it in 1220mm x 1220mm (4' x 4') sheets and cut it into 4 x 3 smaller sheets so that it will fit into my Epilog 12" x 18" 50Watt laser cutter, The grain should run in the direction of the 400mm length.